Our chlorine, hydrochloric acid, sodium hypochlorite and polyaluminium chloride (PAC) are largely used in water treatment, and we are one of the top suppliers of these chemicals in Malaysia and several countries within South East Asia. Solving the wide-ranging water challenges, along with meeting industry and customer demands, is the thrust of our services. CCM Chemicals is focused on growing, adapting and developing technology-based solutions to tackle these emerging trends.
Our Caustic Soda is widely used by the oleochemical industry, particularly in soap noodle production. Our customers are assured of a stable supply of high quality products from our plant in Pasir Gudang.
Other applications of our chlor alkali chemicals are in rubber glove manufacturing, oil & gas and petrochemical industries, pulp and paper manufacturing, electronics and textile, just to name a few.
Throughout the world, a combination of coagulation, sedimentation and filtration is the most widely applied water treatment technology, and has been used since the early 20th century. Coagulation is an important part in raw water treatment to reduce organic matter, stains, turbidity, and microorganism levels. Coagulation is a process that enable the removal of suspended solids from the raw water via formation of micro flocs upon addition of coagulant. Coagulation also helps to improve the appearance of raw water, turning it from varying shades of brown to crystal clear. Wastewater treatment operations also require coagulation, e.g. for chemical phosphorus removal and for reducing suspended solids. In a water treatment facility, the coagulant is added to the water and it is rapidly mixed, so that the coagulant is circulated throughout the water.
Coagulation is a critical step because it determines the efficiency of all processes that follow and influence not only the treated potable water quality but also the economics of treated water production. In Malaysia, one of the common coagulant for potable drinking water treatment plants is Poly Aluminum Chloride (PACApplication of PAC in a coagulation process can successfully remove a large amount of organic compounds, and inorganic precipitates such as iron.
At CCM, we offer high grade PAC for all application of water treatment. Apart from the chemical product, we offer our expertise to perform various tests to provide the best coagulation solution for our customers. A jar test on the raw water at our laboratory would provide detail evidence on the performance of the PAC. Subsequently, our Commercial Engineer will perform plant trial towards achieving the best results at various sites.
Given the effectiveness quality of PAC as a coagulant chemical, the volume of PAC used is significantly lesser than other coagulant such as aluminium sulphate, generating cost savings solutions for the Water Treatment Plant. To date, CCM Chemicals have successfully assisted many Water Treatment Plants throughout Malaysia in providing safe drinking water for the nation.
As your partner for cleaner water, CCM Chemicals offers PROFLOC PAX range of PAC - highly efficient inorganic coagulant for clarification of various raw water quality. Our Profloc PAX range of PAC is manufactured in our ISO 14001: 2004, ISO9001:2015 and ISO18001:2007 accredidated plant in Pasir Gudang, Johor. Our Profloc PAX range of PAC are SPAN, Halal and Kosher certified.
Our various grades Profloc PAX range of PAC are as follows:
|Profloc PAX range of PAC|
|Profloc PAX 18||Profloc PAX 10||Profloc PAXPro Plus|
|Al2O3||16.0 % min||10.0% min||10.0% min|
|Basicity||41 ± 3%||41 ± 3%||70% min|
|Specific Gravity||1.36 ± 0.02||1.21 ± 0.02||1.21 ± 0.02|
|pH ( 1% w/v) solution||3.5 to 5.0||3.5 to 5.0||4.0 ± 0.5|
Note: Please refequest for our product specification for complete product information
Our team of experts are ready to help you find the right solution at optimum cost. Further inquiries relate to Profloc PAX range of PAC applications in potable water treatment process, please contact CCM Chemicals Customer Service at 03 – 5516 6859.